Pricing
Performance Guarantee
Every Tru-Fit custom fit and built club has our performance guarantee. This means that the clubs you receive will match the performance of your best testing club during the fitting. If you're not satisfied, we'll go back to the drawing board to make sure your clubs give you the best performance possible.
Custom Clubs Fees
The typical price range of Tru-Fit golf clubs ranges from:
The best brand, club head, shaft and grip for your game is determined through our Tru-Fit performance fitting process.
The Tru-Fit club fitting process is a rigorous club building, spec-verification process that you won’t find with off-the-rack clubs and pre-assembled clubs. Clubs custom built with the Tru-Fit building process can take 7 to 8 hours to build a set of irons and involves:
Pre-assembled clubs undergo the following Tru-Fit spec verification and modification process:
Custom Fitting Fees
Repairs and Modification Services
We offer the below repairs and modification services. We take pride in our work and craftsmanship and for every club that we repair or modify we use our “Do It Right” philosophy. All clubs we've re-shafted have a 1-year limited warranty. All repairs and modifications are done with the same attention to detail as our Tru-Fit building process.
Repair and Modification Fees
Fees When Material Supplied by Customer
Every Tru-Fit custom fit and built club has our performance guarantee. This means that the clubs you receive will match the performance of your best testing club during the fitting. If you're not satisfied, we'll go back to the drawing board to make sure your clubs give you the best performance possible.
Custom Clubs Fees
The typical price range of Tru-Fit golf clubs ranges from:
- Iron $105 to $550 per club
- Driver $415 to $1080
- Fairway wood $210 to $680
- Hybrid $200 to $500
- Wedge $150 to $550
- Putter $260 to $785
The best brand, club head, shaft and grip for your game is determined through our Tru-Fit performance fitting process.
The Tru-Fit club fitting process is a rigorous club building, spec-verification process that you won’t find with off-the-rack clubs and pre-assembled clubs. Clubs custom built with the Tru-Fit building process can take 7 to 8 hours to build a set of irons and involves:
- Blueprinting the best performing Prototype testing club
- Weight sorting all shafts and grips
- BMT frequency analysing all shafts before install
- Spine and FLO all shafts to insure desired orientation
- Any shafts with outlier properties are tossed away
- MOI matching to 1% of tolerance
- Length cut to 1/16” of tolerance
- Lie and loft angles adjusted to +/- 0.25 degrees of tolerance
- All specs are matched to the Prototype testing club
Pre-assembled clubs undergo the following Tru-Fit spec verification and modification process:
- Blueprinting the best performing Prototype testing club
- Frequency checking all clubs to ensure correct flex
- MOI Matching clubs to 1% of tolerance
- Adjust length to 1/16” of tolerance
- Lie and loft angles measured and adjusted to correct specs
- All specs are matched to the Prototype testing club
Custom Fitting Fees
- Woods/Irons/Hybrids/Wedges/Putters fitting
- $75 per session (up to 90 mins)
- $100 fitting session with on-course evaluation
- $25 for any additional 30 minutes
- $50 for any additional sessions
- Grip fitting - $50 (45 mins)
- Shaft fitting - $75 (up to 90 mins)
- Club analysis/evaluation - $50 (45 mins)
- Dynamic lie angle analysis - $30 per set of irons
- Gap analysis with FlightScope - $50 (45 mins)
Repairs and Modification Services
We offer the below repairs and modification services. We take pride in our work and craftsmanship and for every club that we repair or modify we use our “Do It Right” philosophy. All clubs we've re-shafted have a 1-year limited warranty. All repairs and modifications are done with the same attention to detail as our Tru-Fit building process.
Repair and Modification Fees
- Re-shafting steel - $20 + price of shaft
- Re-shafting graphite - $25 + price of shaft
- Re-attach head - $15
- Graphite shaft pull - $15
- Save grip - $5 per grip*
- Shortening - $10 ($5 with new grip)
- Extension - $15 per club
- Swing weight / MOI (with tip-weights) - $10 per club
- Swing weight / MOI (with Tungsten powder) - $15 per club
- Remove rattle - $25 per club
- Frequency matching - $10 per club
- Shaft optimization (Spine and FLO of shaft) - $30 per shaft
- Loft or lie adjustment - $10 per club
- Re-gripping & Resize grip - $3.5 per club
Fees When Material Supplied by Customer
- Re-shafting steel - $25 per club
- Re-shafting graphite - $30 per club
- Swing weight / MOI (with tip-weights) - $15 per club
- Swing weight / MOI (with Tungsten powder) - $25 per club
- Re-gripping & Resize grip - $5 per club
|
Any Questions? Ready to Book a Consultation? |
